display smart blog

Bank Information Kiosk / Literature Rack

Ed White — 2006-10-30T13:52:36-06:00

Bank One / Valley National Bank Kiosk

Banks are learning that they are also retailers.

They have products they need to market, and it is important to grab the customer's attention. Valley National Bank (a division of Bank One) accomplished this in all of their branches with this attractive, information kiosk.

The top section holds brochures in two vacuum-formed plastic sections alternating with graphic areas. By removing the top 'cap' the graphics can be replaced easily for monthly campaigns.

Two metal brochure holders are attached to the top section and extend out to highlight special literature.

The bottom section is constructed of a 1/2"-thick paper tube laminated with a brushed aluminum covering.

Although approximately 36" inches in diameter, the kiosk ships in a relatively small container. The top cap is removed and the base and literature holders fit within the top section. Once the top cap is replaced, the display is packed in a heavy-duty shipping carton. The display assembles quickly at the bank location.

(multiple galleries of display examples)

Boot Counter / Wall Display

Ed White — 2006-10-23T13:09:47-06:00

Red Wing Boot Point-of-Purchase Display

What better way to sell a hiking or work boot than to put it in the environment where it will be worn - by bringing the woods into the store. This display is constructed from vacuum-formed plastic. The mold was made from an actual chainsaw-cut log.

detail: click for larger image

The bark texture was airbrushed for a realistic appearance. Metal hooks were attached on the back that could accommodate pegboard, slatwall, or slat grid. The brand logo was added to assure that Red Wing boots were the products being highlighted. Lightweight yet sturdy, this display accomplished the goal of placing the boot in the woods.

(multiple galleries of display examples)

Wire & Plastic Slipper Display

Ed White — 2006-10-16T11:16:17-06:00

slipper point-of-purchase display with casters

Solé Slipper Display

This attention-getting display has full litho graphics mounted on 6mm Sintra (expanded pvc plastic) side panels. The display was designed with 1" square tubing giving a slim and lightweight - yet sturdy - look. Eight-inch wire hooks can be positioned to accommodate products of different sizes. The 7-gauge wire slatwall can be shopped from both sides. All metal parts were coated with a bright white glossy powder coating. With 1-1/2" diameter lockable non-marring casters, the display is easily positioned within the retail store.

display detail: hooks & casters

(multiple galleries of display examples)

Interactive Kiosk - Point-of-Purchase Display

Ed White — 2006-10-09T09:53:38-06:00

Polaris Four-Wheeler — Interactive Kiosk

Interactive Kiosk - Realistic Stone

There is more to this point of purchase display than meets the eye.

The display was built specifically for Cabela’s Sporting Good stores to sell accessories for the Polaris 4 Wheel ATV Quad and use as an educational tool. On the back of this kiosk is a touch screen monitor for interactive information on the vehicle.

Touch Screen on Back of Display

Underneath this realistic stone display is a multi-purpose steel frame. A back panel can be removed and the display “jacked” up to move on casters to relocate within the store. A built-in ramp was provided to drive the vehicle on top of the “mountain”. Due to the weight of the four-wheeler (approx. 470 lbs.) it was important to design a frame that was sturdy yet light enough to move easily.

The imitation stone was carved out of polyurethane foam and then sprayed with a tough water resistant urethane “skin”. The “rocks” were then air brushed by artisans for realism.

The side panels of the display are slatwall for hanging product.

(multiple galleries of display examples)

Plastic Slatwall Spinner Display

Ed White — 2006-10-02T09:35:28-06:00

Zondervan Publishing—Children’s Story Keepers Gift Center

plastic slatwall spinner

This display is a unique spinner point-of-purchase display. The center section is a four sided plastic slatwall spinner with pockets for product. On two sides are plastic slatwall panels the hanging product.

The base is constructed of MDF (medium density fiberboard) with low pressure laminate covering. The graphics are screen printed. The header was printed in four color offset printing and laminated to foam core board.

The display had four black plastic “twin” casters for easy repositioning within the store.

The display attracted the attention of parents and kids alike.

(multiple galleries of display examples)

Multi-Purpose Acrylic Display

Ed White — 2006-09-25T10:36:14-06:00

Abbey Press Acrylic Necklace Counter/Wall Display

counter display with easel

Abbey Press recently introduced this multi-purpose acrylic display for their necklace and bracelet gift items. They wanted a unique display solution that would market their product on slatwall or on a counter or shelf.

Display Smart developed an acrylic display that performs well in several locations in a point-of-purchase retail environment. It can function as a counter unit with an easel or hang on slatwall.

custom acrylic display
on slatwall

The graphics have been digitally printed on 80# cover stock and slide in between two layers of acrylic behind the product. Updated graphics can be inserted at any time. This enables the display to endure multiple marketing roll-outs and improves the long-term cost-effectiveness of the display.

Display Smart designed the acrylic hooks to have a “saddle” holder glued on the acrylic back plate. The hooks can be attached at the retail location and then loaded with product. This design allows the display to ship flat in a carton to reduce damage in shipment and minimize freight costs.

(multiple galleries of display examples)

Molded or Cast Urethane

Glen — 2006-01-16T23:57:03-06:00

Molded Urethane is a unique and cost effective process to mold items in smaller quantities that would not be economical to accomplish by casting in metal or injection molding. The process is a great for branding displays and fixtures. Mold costs can range from a few hundred dollars to five thousand dollars for a very complex mold.

A two part mold is made by pouring a flexible plastic around an object or “pattern”. The polyurethane plastic is poured into the mold and then let to cure. The flexible mold is pulled back to release the part. Polyurethane can be painted, drilled, cut, objects cast within, and combined with other components.

Look closely at the few examples provided. Molded Urethane can be made to look like steel, bronze, copper, aluminum by adding metal particles. By making the mold from a stone, a piece of wood or sand the cast plastic is almost indistinguishable from the real thing. The manufacturing process allows producing full displays or components to develop the image you want.

Call Display Smart toll free at 888-843-1870 to learn more how Molded Urethane can be used effectively on your next project. Please click on our Resource Info or Gallery web site pages to see other examples of our manufacturing capabilities.

Click here to request a free article on Molded Urethane.

Sunflower Board- Green Sustainable Product

Glen — 2005-10-24T22:31:19-06:00

What happens when we take natural fibers from an abundant renewable resource—Sun Flower seed hulls, and turn them into a strong and attractive panel board with bio-resins made from Soy Beans?

1. A fresh and attractive new material lends itself to durable product displays.
2. A strong and durable sheet material creates a new look for store fixtures.
3. Using new materials, like Dakota Burl™, creates visual interest, fosters environmental responsibility, and encourages curiosity.

Dakota Burl™ is a unique bio-based decorative composite material, made from an abundant agricultural resource. It exhibits the beauty and elegance of traditional burled woods. The natural burled texture and pattern along with its panel properties allow for a variety of applications.

Dakota Burl™ can be used naturally or stained with conventional wood stains to achieve a wide range of color options. It comes in 4’x 8’ sheets to be used in any interior application replacing plywood, particle board or MDF. Available in ½”, ¾” and 1” thicknesses, Dakota Burl™ is dense, durable and emits no toxic gasses.

Dakota Burl™ work surfaces and table tops

Examples of displays made from Dakota Burl™: Sproutz from Jonti Craft

Environ is the creator of Dakota Burl™

Acrylite Corrugated Acrylic Sheet

Glen — 2005-10-18T07:19:21-06:00

Looking for a cool looking accent for a fixture or display? CYRO Industries has a pre-formed wavy sheet that might do the trick. The material has an iridescent coating that gives matt pearlescent type of look on one side and sheen on the other side.

Backlit Photo Displays

Glen — 2005-10-04T22:52:39-06:00

DSA/Phototech Inc.'s ThinSlide 2.5 slide access illuminated display for small to very large graphics combines a narrow profile with economy and ease of access. At only 2.5 in. deep, the display is well within ADA guidelines, which require 4 in. maximum depth in public areas. The UL-listed ThinSlide 2.5 lightbox uses standard fluorescent lighting. It comes in six sizes from 40 in. by 50 in. to 72 in. by 144 in. and will accommodate all materials designed for backlit or edgelit applications. Using a Phillips-head or optional security screwdriver, the user can quickly remove any or all sides of the display, which slide out of place to allow fast changeout of graphics. Manufactured of extruded aluminum, the ThinSlide 2.5 display is designed to be light yet durable and to dissipate heat effectively. The standard finish is brushed aluminum; custom sizes and powdercoat finishes are also available.

DSA/Phototech has supplied lightboxes and other graphic display systems to the retail, advertising, and trade exhibit industries for more than three decades.

Source: NASFM

Mood Light Panels

Glen — 2005-10-04T22:48:19-06:00

Interesting way to add a new dimension to a light fixture.

Revolutionizing the Retail Space

Glen — 2005-10-04T22:31:23-06:00

There's a great article about the changing face of retail spaces over at RetailTrafficMag.com.

Light Bulbs Burning Out Of Industry

Glen — 2005-10-04T22:25:42-06:00

The light bulb will soon become obsolete in all industries due to the adoption of the LED. The display industry has already started using LED's in displays, and the trend has branched outward according to an article at eBuild.com.

Recessed Lighting In Merchandise Cases

Glen — 2005-10-04T22:17:41-06:00

Energy-efficient, high-impact and unobtrusive lighting can bolster sales by effectively displaying the color and beauty of merchandise. Amerlux Lighting Solutions' SVA lighting fixtures combine a high-performance optical system engineered around the ED17 ceramic metal halide lamp with a linear spread distribution designed for display-case illumination. The right amount of light, not overpowering but focused, is delivered to the case merchandise with minimal glare, making it look as though it were illuminated from within the case.

The SVA luminaire also offers significant energy savings. Spaced up to 4 ft. o.c., these luminaires can replace 100-watt incandescent lamps at 18 in. o.c., reducing energy consumption by more than half and installation costs by 33%. The SVA uses the ED17 ceramic metal halide lamp, which has a longer rated life than standard PAR MH or incandescent lamps; this allows re-lamping cycles to be extended. Having only one lamp to inventory also saves time and money. And the recessed in the ceiling design help lower HVAC costs, as heat dissipates above the ceiling...

Using Scents makes $ and Cent$ at Retail

Glen — 2005-10-03T21:21:05-06:00

Olfactory/Fragrance/Scent

The use of olfactory marketing at the point of sale creates an effect of surprise and is an important differentiation factor. Not only does it generate a better memory of the commercial message and the brand name with which it is associated but it intensifies the message and strengthens the positioning of products. Customers tend to browse longer and do more impulse buying when pleasurable scents are detected.