Bank Information Kiosk / Literature Rack
Bank One / Valley National Bank Kiosk
|
Banks are learning that they are also retailers.
They have products they need to market, and it is important to grab the customer's attention. Valley National Bank (a division of Bank One) accomplished this in all of their branches with this attractive, information kiosk.
The top section holds brochures in two vacuum-formed plastic sections alternating with graphic areas. By removing the top 'cap' the graphics can be replaced easily for monthly campaigns.
Two metal brochure holders are attached to the top section and extend out to highlight special literature.
The bottom section is constructed of a 1/2"-thick paper tube laminated with a brushed aluminum covering.
Although approximately 36" inches in diameter, the kiosk ships in a relatively small container. The top cap is removed and the base and literature holders fit within the top section. Once the top cap is replaced, the display is packed in a heavy-duty shipping carton. The display assembles quickly at the bank location.
Contact us if you are interested in having Display Smart produce a unique display for your product.
Permanent link: Bank Information Kiosk / Literature Rack
Boot Counter / Wall Display
Red Wing Boot Point-of-Purchase Display
 |
What better way to sell a hiking or work boot than to put it in the environment where it will be worn - by bringing the woods into the store. This display is constructed from vacuum-formed plastic. The mold was made from an actual chainsaw-cut log.
 detail: click for larger image |
The bark texture was airbrushed for a realistic appearance. Metal hooks were attached on the back that could accommodate pegboard, slatwall, or slat grid. The brand logo was added to assure that Red Wing boots were the products being highlighted. Lightweight yet sturdy, this display accomplished the goal of placing the boot in the woods.
Contact us if you are interested in having Display Smart produce a unique display for your product.
Permanent link: Boot Counter / Wall Display
Wire & Plastic Slipper Display
slipper point-of-purchase display with casters |
Solé Slipper Display
This attention-getting display has full litho graphics mounted on 6mm Sintra (expanded pvc plastic) side panels. The display was designed with 1" square tubing giving a slim and lightweight - yet sturdy - look. Eight-inch wire hooks can be positioned to accommodate products of different sizes. The 7-gauge wire slatwall can be shopped from both sides. All metal parts were coated with a bright white glossy powder coating. With 1-1/2" diameter lockable non-marring casters, the display is easily positioned within the retail store.
 display detail: hooks & casters |
Contact us if you are interested in having Display Smart produce a unique display for your product.
Permanent link: Wire & Plastic Slipper Display
Interactive Kiosk - Point-of-Purchase Display
Polaris Four-Wheeler — Interactive Kiosk
Interactive Kiosk - Realistic Stone |
The display was built specifically for Cabela’s Sporting Good stores to sell accessories for the Polaris 4 Wheel ATV Quad and use as an educational tool. On the back of this kiosk is a touch screen monitor for interactive information on the vehicle.
Touch Screen on Back of Display |
Underneath this realistic stone display is a multi-purpose steel frame. A back panel can be removed and the display “jacked” up to move on casters to relocate within the store. A built-in ramp was provided to drive the vehicle on top of the “mountain”. Due to the weight of the four-wheeler (approx. 470 lbs.) it was important to design a frame that was sturdy yet light enough to move easily.
The imitation stone was carved out of polyurethane foam and then sprayed with a tough water resistant urethane “skin”. The “rocks” were then air brushed by artisans for realism.
The side panels of the display are slatwall for hanging product.
Contact us if you are interested in having Display Smart produce a unique display for your product.
Permanent link: Interactive Kiosk - Point-of-Purchase Display
Plastic Slatwall Spinner Display
Zondervan Publishing—Children’s Story Keepers Gift Center
 plastic slatwall spinner |
This display is a unique spinner point-of-purchase display. The center section is a four sided plastic slatwall spinner with pockets for product. On two sides are plastic slatwall panels the hanging product.
The base is constructed of MDF (medium density fiberboard) with low pressure laminate covering. The graphics are screen printed. The header was printed in four color offset printing and laminated to foam core board.
The display had four black plastic “twin” casters for easy repositioning within the store.
The display attracted the attention of parents and kids alike.
Contact us if you are interested in having Display Smart produce a unique display for your product.
Permanent link: Plastic Slatwall Spinner Display
Multi-Purpose Acrylic Display
Abbey Press Acrylic Necklace Counter/Wall Display
 counter display with easel |
Abbey Press recently introduced this multi-purpose acrylic display for their necklace and bracelet gift items. They wanted a unique display solution that would market their product on slatwall or on a counter or shelf.
Display Smart developed an acrylic display that performs well in several locations in a point-of-purchase retail environment. It can function as a counter unit with an easel or hang on slatwall.
 custom acrylic display on slatwall |
The graphics have been digitally printed on 80# cover stock and slide in between two layers of acrylic behind the product. Updated graphics can be inserted at any time. This enables the display to endure multiple marketing roll-outs and improves the long-term cost-effectiveness of the display.
Display Smart designed the acrylic hooks to have a “saddle” holder glued on the acrylic back plate. The hooks can be attached at the retail location and then loaded with product. This design allows the display to ship flat in a carton to reduce damage in shipment and minimize freight costs.
Contact us if you are interested in having Display Smart produce a unique display for your product.
Permanent link: Multi-Purpose Acrylic Display
Molded or Cast Urethane
Molded Urethane is a unique and cost effective process to mold items in smaller quantities that would not be economical to accomplish by casting in metal or injection molding. The process is a great for branding displays and fixtures. Mold costs can range from a few hundred dollars to five thousand dollars for a very complex mold.
A two part mold is made by pouring a flexible plastic around an object or “pattern”. The polyurethane plastic is poured into the mold and then let to cure. The flexible mold is pulled back to release the part. Polyurethane can be painted, drilled, cut, objects cast within, and combined with other components.
Look closely at the few examples provided. Molded Urethane can be made to look like steel, bronze, copper, aluminum by adding metal particles. By making the mold from a stone, a piece of wood or sand the cast plastic is almost indistinguishable from the real thing. The manufacturing process allows producing full displays or components to develop the image you want.
Call Display Smart toll free at 888-843-1870 to learn more how Molded Urethane can be used effectively on your next project. Please click on our Resource Info or Gallery web site pages to see other examples of our manufacturing capabilities.
Click here to request a free article on Molded Urethane.
 |  |
 |
 |
 |  |
 |  |
Permanent link: Molded or Cast Urethane
Sunflower Board- Green Sustainable Product
What happens when we take natural fibers from an abundant renewable resource—Sun Flower seed hulls, and turn them into a strong and attractive panel board with bio-resins made from Soy Beans?
1. A fresh and attractive new material lends itself to durable product displays.
2. A strong and durable sheet material creates a new look for store fixtures.
3. Using new materials, like Dakota Burl™, creates visual interest, fosters environmental responsibility, and encourages curiosity.
Dakota Burl™ is a unique bio-based decorative composite material, made from an abundant agricultural resource. It exhibits the beauty and elegance of traditional burled woods. The natural burled texture and pattern along with its panel properties allow for a variety of applications.
Dakota Burl™ can be used naturally or stained with conventional wood stains to achieve a wide range of color options. It comes in 4’x 8’ sheets to be used in any interior application replacing plywood, particle board or MDF. Available in ½”, ¾” and 1” thicknesses, Dakota Burl™ is dense, durable and emits no toxic gasses.
Dakota Burl™ work surfaces and table tops
 |  |
Examples of displays made from Dakota Burl™: Sproutz from Jonti Craft
 |  |
Environ is the creator of Dakota Burl™
What Is Dakota Burl™?
• A unique composite material that utilizes a bio-based technology and exhibits the beauty and elegance of traditional burled woods.
How Does Dakota Burl™ Benefit Our Environment?
• Manufactured from a rapidly renewable agricultural fiber product.
• No out-gassing solvents are added during the manufacturing process, thus the material emits no VOCs into the atmosphere.
What Does Dakota Burl™ Look Like?
• The defined black outlining complements the natural yellow and brown tones of the fibers creating a distinctive pattern.
• Natural or stained, the material resembles authentic burled woods, giving a wide range of color options.
• The burled pattern and natural appearance run throughout the thickness of the material.
How Does Dakota Burl™ Work?
• The material cuts, sands and routes with standard woodworking tools.
• Traditional wood staining and finishing techniques can be used on the material to create a wide range of appearances.
• Four foot by eight foot panels are manufactured in 1/2", 3/4" and 1" thicknesses.
How Can I Use Dakota Burl™?
• Superior panel properties allow for a variety of applications.
• Table Surfaces, Horizontal and Vertical Surfaces (transaction surfaces and interior decorative wall applications), Cabinetry, Furniture and Architectural Applications are all excellent uses for Dakota Burl™. Please note that this material is intended for commercial and residential interior applications only.
NOTE: Not recommended for kitchen and/or bath countertop applications.
Permanent link: Sunflower Board- Green Sustainable Product
Acrylite Corrugated Acrylic Sheet
Looking for a cool looking accent for a fixture or display? CYRO Industries has a pre-formed wavy sheet that might do the trick. The material has an iridescent coating that gives matt pearlescent type of look on one side and sheen on the other side.
A standard sheet size is 41” W x 98”L in .118-inch thick (3 mm). Special lengths can be obtained up to 275 inches long (22.9 ft). The flutes are approximately ¾” of an inch high and about 3 inches apart from arc to arc. (See the drawing below for more details)
Acrylite corrugated sheet is extruded from impact-modified acrylic to be more break-resistant than sheet made from conventional acrylic. The material has an infrared reflecting surface coating and is resistant to aging. It does not become yellow or brittle The corrugated sheet was initially designed for patio roofs and is tough enough to withstand hail.
The material can be cut with a high-speed hand held circular saw and drilled. It can be fabricated mechanically, solvent or sonic welded.
Designers have shown interest in using the corrugated acrylic sheet because of its versatility and attractive appearance. It has been used for building horizontal shelves of wine racks, the fronts of cabinet doors and for segments for a trade show booth.
Design ideas:
Store Fixtures
Decorative front on a cash wrap
Divider panels
End Cap backdrop panel
Sign panel
In-Store Marketing – P-O-P
Base for a cosmetic display
Shoe Platform for Shoe Display
Wrap-around backdrop
Display Column
To learn more how we could include this material in your fixture or display project please call us toll free at 888-843-1870.
Permanent link: Acrylite Corrugated Acrylic Sheet
Backlit Photo Displays
DSA/Phototech Inc.'s ThinSlide 2.5 slide access illuminated display for small to very large graphics combines a narrow profile with economy and ease of access. At only 2.5 in. deep, the display is well within ADA guidelines, which require 4 in. maximum depth in public areas. The UL-listed ThinSlide 2.5 lightbox uses standard fluorescent lighting. It comes in six sizes from 40 in. by 50 in. to 72 in. by 144 in. and will accommodate all materials designed for backlit or edgelit applications. Using a Phillips-head or optional security screwdriver, the user can quickly remove any or all sides of the display, which slide out of place to allow fast changeout of graphics. Manufactured of extruded aluminum, the ThinSlide 2.5 display is designed to be light yet durable and to dissipate heat effectively. The standard finish is brushed aluminum; custom sizes and powdercoat finishes are also available.
DSA/Phototech has supplied lightboxes and other graphic display systems to the retail, advertising, and trade exhibit industries for more than three decades.
Source: NASFM
Permanent link: Backlit Photo Displays
