« September 2006 | Main | January 2007 »
October 30, 2006
Bank Information Kiosk / Literature Rack
Bank One / Valley National Bank Kiosk
|
Banks are learning that they are also retailers.
They have products they need to market, and it is important to grab the customer's attention. Valley National Bank (a division of Bank One) accomplished this in all of their branches with this attractive, information kiosk.
The top section holds brochures in two vacuum-formed plastic sections alternating with graphic areas. By removing the top 'cap' the graphics can be replaced easily for monthly campaigns.
Two metal brochure holders are attached to the top section and extend out to highlight special literature.
The bottom section is constructed of a 1/2"-thick paper tube laminated with a brushed aluminum covering.
Although approximately 36" inches in diameter, the kiosk ships in a relatively small container. The top cap is removed and the base and literature holders fit within the top section. Once the top cap is replaced, the display is packed in a heavy-duty shipping carton. The display assembles quickly at the bank location.
Contact us if you are interested in having Display Smart produce a unique display for your product.
Posted by Ed White at 01:52 PM
October 23, 2006
Boot Counter / Wall Display
Red Wing Boot Point-of-Purchase Display
 |
What better way to sell a hiking or work boot than to put it in the environment where it will be worn - by bringing the woods into the store. This display is constructed from vacuum-formed plastic. The mold was made from an actual chainsaw-cut log.
 detail: click for larger image |
The bark texture was airbrushed for a realistic appearance. Metal hooks were attached on the back that could accommodate pegboard, slatwall, or slat grid. The brand logo was added to assure that Red Wing boots were the products being highlighted. Lightweight yet sturdy, this display accomplished the goal of placing the boot in the woods.
Contact us if you are interested in having Display Smart produce a unique display for your product.
Posted by Ed White at 01:09 PM
October 16, 2006
Wire & Plastic Slipper Display
slipper point-of-purchase display with casters |
Solé Slipper Display
This attention-getting display has full litho graphics mounted on 6mm Sintra (expanded pvc plastic) side panels. The display was designed with 1" square tubing giving a slim and lightweight - yet sturdy - look. Eight-inch wire hooks can be positioned to accommodate products of different sizes. The 7-gauge wire slatwall can be shopped from both sides. All metal parts were coated with a bright white glossy powder coating. With 1-1/2" diameter lockable non-marring casters, the display is easily positioned within the retail store.
 display detail: hooks & casters |
Contact us if you are interested in having Display Smart produce a unique display for your product.
Posted by Ed White at 11:16 AM
October 09, 2006
Interactive Kiosk - Point-of-Purchase Display
Polaris Four-Wheeler — Interactive Kiosk
Interactive Kiosk - Realistic Stone |
The display was built specifically for Cabela’s Sporting Good stores to sell accessories for the Polaris 4 Wheel ATV Quad and use as an educational tool. On the back of this kiosk is a touch screen monitor for interactive information on the vehicle.
Touch Screen on Back of Display |
Underneath this realistic stone display is a multi-purpose steel frame. A back panel can be removed and the display “jacked” up to move on casters to relocate within the store. A built-in ramp was provided to drive the vehicle on top of the “mountain”. Due to the weight of the four-wheeler (approx. 470 lbs.) it was important to design a frame that was sturdy yet light enough to move easily.
The imitation stone was carved out of polyurethane foam and then sprayed with a tough water resistant urethane “skin”. The “rocks” were then air brushed by artisans for realism.
The side panels of the display are slatwall for hanging product.
Contact us if you are interested in having Display Smart produce a unique display for your product.
Posted by Ed White at 09:53 AM
October 02, 2006
Plastic Slatwall Spinner Display
Zondervan Publishing—Children’s Story Keepers Gift Center
 plastic slatwall spinner |
This display is a unique spinner point-of-purchase display. The center section is a four sided plastic slatwall spinner with pockets for product. On two sides are plastic slatwall panels the hanging product.
The base is constructed of MDF (medium density fiberboard) with low pressure laminate covering. The graphics are screen printed. The header was printed in four color offset printing and laminated to foam core board.
The display had four black plastic “twin” casters for easy repositioning within the store.
The display attracted the attention of parents and kids alike.
Contact us if you are interested in having Display Smart produce a unique display for your product.
Posted by Ed White at 09:35 AM